气相二氧化硅在低粘树脂中的沉降问题？？？！！！

wonder · 发表于 2005-8-9 14:16:59

<

>气相二氧化硅在低粘树脂中的沉降问题？？？！！！如何解决/？？请教！

sio2liu · 发表于 2005-8-31 22:31:33

以下是引用wonder在2005-8-30 16:46:04的发言：

<>就一般的通用树脂，黏度在160~180CPS（brookfield 2#/60)或更低。卡博特的气相二氧化硅！谢谢你们的回信！

<

>欢迎来电垂询交流

[em07]

[此贴子已经被作者于2005-9-3 21:39:54编辑过]

kinwdc · 发表于 2005-8-9 18:52:27

可能和气相二氧化硅的品级表面处理有关系~~ 方便的话请告知是那种树脂目前用那种气相二氧化硅

sio2liu · 发表于 2005-8-10 10:55:44

一起等待楼主翔示…………

wonder · 发表于 2005-8-30 16:46:04

<

>就一般的通用树脂，黏度在160~180CPS（brookfield 2#/60)或更低。卡博特的气相二氧化硅！谢谢你们的回信！

link · 发表于 2005-8-30 22:29:55

BYK®-405 Rheology additive for solvent-based systems. The additive is most suitable for coatings based on polyesters, acrylics and alkyds which contain fumed silica. The fumed silica must be at least partially hydrophilic. BYK®-405 facilitates the incorporation of the silica, prevents its separation, increases and stabilizes the thixotropic behavior. It contributes to gloss clarity improvement and humidity resistance of fumed silica containing coatings. Thixotropic resin systems can show additional thixotropy with the post-addition of BYK®-405. Composition  Solution of polyhydroxycarboxylic acid amides
Solvents  Xylene / Alkylbenzenes / Isobutanol 5 / 4 / 1
Dosage (Additive as supplied)  20-40 % upon fumed silica
Typical Physical Data  Non-volatile matter: 52 %

link · 发表于 2005-8-30 22:31:39

<

>BYK-405<

>可以增加并且稳定体系的触变行为。。。。<

>不知道有没有用。。。呵呵[em01]

气相二氧化硅在低粘树脂中的沉降问题？？？！！！

浏览过的版块